Receurse

How to insulate an old house cheaply with Energy Efficient Insulation?

By / September 15, 2020 / Home Improvement Ideas, Receurse

An old house has all our memories, fun, emotions, and everything. And it looks antique and unique at the same time. But the problem with the old house is, it remains hot in summer and cold in the winter. That means there is a problem with insulation.

If you can use Energy Efficient Insulation, then you can solve the problem. But surely you do not want to invest a lot of money on your old house. Also, you do not want to increase your energy bills. That is why you need to know how to insulate an old house cheaply with Energy Efficient Insulation.

If you can insulate your old house with energy-saving insulation cheaply, you can save your money on energy bills, and you can keep your room warm and cold at a cheap rate. So, without any further delay, let’s get into the main part.

Energy Efficient Insulation make your home better

Types of insulation

Before going to know the types of insulation. There are different types of insulation you can use in your old house. But these five types of insulations are mostly used nowadays for home. Here are those.

Blanket Batts and Rolls

Blanket Batts and Rolls is a great inexpensive way to insulate your house. These batts and rolls are made of fiberglass, although some versions are made of mineral wool, cotton, and plastic fibers. And the best part about this type is that it can fit perfectly in wall studs, attic rafters, and even floor joists in width. However, you need to cut it for proper length.

 These rolls and batts can keep your home warm in the winter and cool in the summer. And at the same time, it can save your energy bills because it prevents air from come in and come out.  When it comes to costing, it costs $0.64 – $1.19 per square foot. That means, it is less costly for sure.

 

Spray foam insulation

Spray foam insulation other types of insulation for insulating existing homes. The main task of spray foam insulation is sealing the leak between the walls. Maybe you do not know that there some leaks between your walls that we cannot see by naked eyes.

You need to spray liquid polyurethane is sprayed into the cavity of the wall.  And then it expands as well as hardens into the solid foam. Though it is an inexpensive way of insulation, it costs more than Blanket Batts and Rolls. But it will get your job done for sure. It saves your energy bills and insulates your old home perfectly.

There are different types of spray foam insulation available in the market. Based on the type, the cost varies from $0.44 to $1.5 per board foot.

 

Blown-In Insulation

Blown-In Insulation is the best type of insulation for existing finished area or hard-to-reach spaces or irregularly shaped. A machine applies it. A machine blows paper-like materials into the area that need to be insulated. These materials are made of rock wool, fiberglass, or reclaimed cellulose material.

It is the easiest method of insulation in your old house. And it is an Energy Efficient Insulation as well. But you should hire a professional to get the best result. You know, you do not have the machine, and you do not want to screw it up.

Now the question comes how much it costs. Well, it depends on many things. But on average, it costs $1.5 per square feet/ it seems cheap to me.

 

Foam Board or Rigid Foam Panels

Unlike the previous one, the Foam Board or Rigid Foam Panels are suitable for the unfinished areas. And the best part about this one is that you can use it in almost every part of your room to make your home insulated. From a floor to an unvented low-slope roof, the foam boards or rigid foam panels can help you get your job done.

These provide excellent insulation and reduce the heat amount conducted through your room wall. As a result, your room remains cold during the summer and hot during the winter. A lot of homeowners rely on it for insulating their old house.

Just like other types of insulation, it is cheap as well. On average, it costs $0.75 to $1.65 based on the use and when are you using it.

 

Reflective or Radiant Barrier

And the last type of insulation we are going to discuss is Reflective or Radiant Barrier. And this type is unique and different from any other kind of insulation. Where most of the insulations work from inside and outside and protect the air from coming in and out, this one just protects the heat away from home by reflecting.

That is why it is suitable for hot climate only. The insulation is made of some reflective barriers placed over a substrate material that reflects the heat. People usually use it in the attic so that the direct sunlight cannot make the home hot during the summer.

And when it comes to costing, the material costs 10 and 25 cents for every square foot for single-side barriers. And the rest depends on how you install it. If you install it yourself, it costs only that. And if you hire experts, the cost depends on the expert.

 

How to insulate an old house cheaply with Energy Efficient Insulation

Now you have known the types of insulation used to insulate the old home. Now let’s check How to insulate an old home cheaply with Energy Efficient Insulation.

 

Doors and Windows insulation

If you consider Energy Efficient Insulation, then doors and windows insulation can be a perfect one for your old house. If you are in a home that has single-glazed windows or doors, you will understand that these windows or doors can be cold and draughty. But with this simple and cheap doors and windows installation, you can efficiently insulate your house.

You can simply put a layer of plastic film on your window or door frames and then use a hairdryer to make out any wrinkles smoother. And you can buy a window film kit at an affordable price. I know old windows and doors look classy. But these are not energy efficient insulation. You have to add a layer to insulate.

For costing, it completely varies from windows to windows, doors to doors. The lowest cost is $58 to $72 for windows, and the highest might be $1,932 to $2,500. But it is for replacing windows. And if you want to just add a layer, you can do it within less price. For doors, it is more.

 

Insulating the Attic

In general, old homes have a large attic. You may think that it is a lot easier to Loft insulation. But the reality is not that at all. Because of that vast space, there might be large gaps as well. So covering all the gaps and insulate your home is not easy. Even if there is a half-inch gap, your all efforts will end up in a vein.

Now how will you cover those gaps? You can use spray foam or foam to seal those gaps. It will be comfortable and energy efficient insulation. And it will be cheap enough as well. You may use plastic to avoid spray foam to get into the places where you do not want. The same goes for a loft, roof, or flat roof. One-fourth of the heat is gone through the roof. So do your Loft insulation it at first.

Maybe you are thinking about the Roof insulation cost. The roof installation cost is not that much. You can do it at $400. However, it varies from area to area, types of insulation, and labor costs.

 

Insulating Walls in an Old House

If your house was built prior to 1920, your house walls might be solid enough. However, there might be some gaps between the walls. And if your home was built after 1920, then chances are high that the walls are cavity walls. The gaps are more there. So, you have to insulate your walls for energy efficient insulation if it is cavity wall.

To cover the walls, you can use rigid foam or rigid board insulation for better insulation. It will save a lot of energy to make your home warmer in winter and cool in summer. It might be tricky to insulate the old walls, but you know, it is not impossible.

Costing depends on the area, labor cost, and types of materials or insulation you use. However, for insulating your walls, the average national cost is $1.00 per square foot.

 

Crawl Space and Rim Joist Insulation

One of the main problems with the old home is Crawl Space and Rim Joist Insulation. These crawl spaces can be 5 feet high and made of stone. And this can be a big problem when it comes to insulating your old house. So if you want to insulate your house, you should cover these spaces for sure.

The best thing you can do to cover these spaces is spray foam insulation. You know, spray foam insulation is an easy and cheap way to insulate any home. And it is a great energy efficient insulation as well.

And the cost varies a lot when it comes to crawl space insulation. The reason is, the space is not the same and it cannot be calculated by square foot cost. It varies from $3 for one roll to a $300 for larger spaces.

 

Insulating floor

If you want to insulate your room, then you have to insulate your floor. An insulating floor can be a great way to save energy and energy bills from your house. However, you need to insulate your attic only if you are living on the ground floor. You do not need to do it if you are living on the upper level.

But you can do it as well even if you are living on the upper floor because the heat or cold can go down through the floor. You should use rigid insulation foam to insulate your floor and to save energy. And since you are using rigid insulation foam, it will cost $0.75 to $1.65

 

Conclusion

Insulating makes your old house can make it more comfortable and more enjoyable. But insulating your old home can be expensive, and it might not save your energy. That is why I have discussed How to insulate an old home cheaply with Energy Efficient Insulation. I hope this article will help you insulate cheaply that can save energy.

Now you know the types of insulation and how you can do it. Now it is time for action. You should start applying the process or steps I have mentioned above. You can either do it yourself or hire a professional. But I will suggest you hire a professional. You will get the best result — best of luck.

8 Steps to HVAC Cleaning 10 Times Better Than Before.

By / September 15, 2020 / Home Improvement Ideas, Receurse

Cleaning your Heating, Ventilating, and Air-Conditioning (HVAC) system is really important. It saves your money from replacing the AC sooner, and also; it keeps your air conditioner effective for a long time. Other than that, it is essential to get fresh air.

In this era of global warming and pollution, getting fresh air is too much important. And you can get it only when you have a fresh, clean and dust-free Heating, Ventilating, and Air-Conditioning (HVAC) system.

But how HVAC Cleaning works? How can you clean your HVAC? Well, to know that, you have to read this article until the end. We are going to tell you 8 steps to HVAC Cleaning that will make your cleaning 10 times better than before. Here we go.

Your HVAC Cleaning will be Better if you know.

When to clean your HVAC?

In general, you need to clean your HVAC in every three to five years. But you need to do it immediately when;

  • You find unaccepted odor from the HVAC
  • Discharging some visible debris or dirt
  • Contamination of any kind of particles
  • Pollution from water damage, fire, or smoke
  • Contamination from construction dirt
  • Fiberglass duct boards, or liner or other components are showing signs of deterioration

If you find any of these, you should start cleaning it. Besides, when you move to a new home where you do not know if the previous homeowner did regular cleaning or not, you should clean HVAC as well. Also, if you do any kind of molding work in your house or other constructional work, you should clean it as well.

 

What are Duct and Vent?

When it comes to HVAC cleaning, duct and vent are two common terms. You need to know about these two things first. What is Duct and Vent?

The duct is the passage that HVAC use to remove or deliver air. The supply air, return air, and exhaust air all are included in this needed airflow. Besides, it supplies the ventilation air as well. So overall, it is the main way or thing that ensures thermal comfort and indoor air quality.

On the other hand, the vent is the window of the HVAC that allows fresh air to come inside the home and circulate along with the cool air produced by the air conditioner.

 

HVAC Duct Cleaning

That is why HVAC Duct Cleaning is the most important thing when it comes to HVAC Cleaning. Without cleaning this item accurately, you cannot get the best result, no matter how well you clean all the other parts of your HVAC.

However, you need to know that you should not do it by yourself. Maybe you are thinking of Ductwork Cleaning Cost, but if you cannot clean it properly, you will make more losses than the Ductwork Cleaning Cost. It is sensitive, and if not done correctly, it can damage the nature as well as your indoor air quality.

That is why you should always hire HVAC Cleaning Services. They are professional and know how to do it properly without damaging it. 

 

HVAC Cleaning Services

HVAC Cleaning Services include many things that help you a lot to maintain your HVAC. 

HVAC Ducts: clean return air duct, supply duct, branch distribution ducts, and seal all the access panel in ducts.

Grills and Diffusers: clean and remove all return air grilles and supply registers.

Furnace Plenums: clean both the furnace supply air plenum as well as return air plenum.

Furnace Components: other than that, clean, remove and reinstall blower housing, motor; & assembly, clean coil, pan drain, drain, and furnace heat exchanger.

Furnace Air Filter: replace or wash the air filter

 

Steps on Cleaning your Air Ducts and Vents

If you do not want to hire any service provider and want to save your HVAC Coil Cleaning Cost, then you can follow the 8 steps I am going to tell you. Even if you do not do it by yourself, you should know the steps as well. 

 

Turn off your HVAC

The first step is to turn your HVAC off. But you can keep the fan turn on so that it loses the debris and at the same time, blow all the dirt as well.

 

Remove debris

Then from the exterior compressor or condenser, remove the fan cage. You can use a screwdriver to make it faster. Now clean all the debris by your hand or other tools from the interior.

 

Clean Supply Registers

Now you may find all the debris in the supply register since all are accumulated there. Now depending on the amount and type, you can use different tools such as vacuum cleaner or brush. Simply lift that register and clean the area. 

 

Clean Return Air Registers

Now unscrew the return register, and by using a long and thin brush, clean all the debris accumulated there. It is important.

 

Vacuum Clean the Air Ducts

This is where the main task begins. You need a powerful vacuum cleaner here. By using the cleaner, try to reach each and every spot where debris and dirt might have. Leave no place at all. Try to use a brush and cleaning cloth to remove, lose, and wipe the interior duct and other spots completely. If you can do it properly, your main task is almost done.

 

Clean Blower Compartment

The majority of the debris and dirt are accumulated around the furnace. So, remove the panels on the front of the furnace to reach the blower compartment and the return air boot. Now again, use your vacuum cleaner and clean the debris and dirt. Be careful here so that you do no damage at all.

 

Replace Furnace Filter

A damaged, clogged, or malfunctioned Furnace Filter can reduce airflow and damage the air quality for sure. That is why after cleaning the duct and vent, make sure you have cleaned the Furnace Filter as well. If possible, replace it and take help from professionals. 

 

Turn the power on

And lastly, turn your HVAC on and enjoy.

 

Conclusion

Keeping your indoor air fresh, cool, and pollution-free is the most vital thing for you. And to do that, you have to focus on HVAC Cleaning. We have mentioned 8 steps that can help you clean your HVAC more effectively than ever.

Now it is your duty to apply these on your HVAC so that you can keep your family healthy and air-pollution-free all the time.

7 WAY TO UPDATE BATHROOM TILE WITHOUT REPLACING ON A TIGHT BUDGET

By / September 15, 2020 / Home Improvement Ideas, Receurse

The bathroom is the place that every people want to make beautiful and stylish. Even it is more important to make it beautiful, fresh, and elegant than to make your home beautiful, smart, and fresh. If the bathroom is not good, your entire investment on your home improvement is not good, trust me.

That is why everyone tries to make his or her bathroom clean, fresh, and stylish. However, after a certain time, it requires updating to look new and fresh. But how can you update bathroom tile without replacing tile?

Well, in this article, we will talk about 7 ways to update your bathroom tiles without replacing the tiles. So here we go.

 

Update Bathroom Tile Without Replacing

Paint it

The first and easiest way to update your bathroom tile without removing it is coloring. It easy, and you change the entire design of your bathroom with this. However, it will not last as long as it would be if you replace the tile.

When painting, make sure you have chosen the right color that suits best your bathroom. In that case, you should consult a professional painter. He or she will tell you about the design.

Also, do not try to paint it yourself. Since you are painting over the tile, it is important you hire a professional and then let him finish the work.

One of the main reasons for this suggestion is that there is no ready mate paint in the market that you can directly put into your tile. So it will be a wise decision if you hire a professional.

 

Covering old bathroom tiles with wallpaper

Wallpaper is another good way to update bathroom tile without replacing tile. And it is the simplest way I guess. You do not have to be a paint master to add a wallpaper to your bathroom wall as well as the door. All you need to do is to choose some good, funny, and refreshing wallpaper and add it over the tile in the bathroom. You are done updating.

And since it is the cheapest, you do not have to spend a lot of money on updating. Even you can do it with a very little budget.

 

Decorative Decals

If you do not know how to update old bathroom tiles in a tight budget, then decorative decal is the best way for you. Decals are designed especially to work in tiles. In your bathroom tile, decals will last a long time, and you will have a good update.

The best part about decal is, you can get customized the artwork on it. If you want a beach or hill artwork, you can get it on the decal and set it to your bathroom. It will increase the beauty of your bathroom for sure.

Besides, you can change it as well after a certain time. Overall, it is a great way to update your bathroom tile without replacing it.

 

Add sticker

Many people often get confused between stickers and wallpaper. But these two are not the same. If you want to know how to cover bathroom tiles cheaply, then this item can be the one you are looking for. Stickers are beautiful, easy to use, and last long.

Another advantage is, you can change it whenever you want. Besides, there are thousands of options available. You can get different designs, different scenes, and different pictures as well.

And these are very affordable. You do not have to spend a lot of money on it. Some sticker companies offer free shipping and free installing as well. Even you can add it over the tiles if you want.

That means, overall, you are getting a good design at an affordable price with easy installation. So what else can you expect?

 

Install some shelves

If you do not want to put anything over your tile in the bathroom, you can change the design of your bathroom. It will make your bathroom updated, and at the same time, you do not have to put anything over the tile.

In that case, installing some different types of shelves can change the entire outlook of your bathroom. In addition, you can put some amazing showcase on those shelves along with soap cases and shampoo bars. It might be a small change, but it will update the bathroom tile without replacing tile.

 

Market makeover

It is one of the best ways to update your tile. It will make your tile looks new. And it will entirely change the look of your bathroom, and you will feel like you are in a new bathroom.

To do that, you can either hire a professional or do it yourself. But you have to be a good artist in order to create a design on the tile.

At first, clean your bathroom tile with water, vinegar, soapy water, or any other things and then let it dry. After drying, use a permanent marker and create your design.

You can design as you want. Also, you can write quotes with design, as well. If it is a child bathroom, you can design with a funny cartoon.

Add accent tile

And lastly, you can add accent tile over the tile. This is an easy and nice way to update bathroom tile without replacing tile. The best part about the accent tile is that you will find different colorful accent tile. These are small and look good.

So if you add it over your old, faded tiles, you can easily change the look of your bathroom.

 

Final thoughts

These are the 7 ways to update bathroom tile without replacing tile in a tight budget. These are simple, and you do not have to put a lot of effort to complete it.

We all want a fresh, new-looking, and beautiful bathroom for us. So whenever your tile gets older, it is your duty to update it. And these are the best ways to update it without removing the tile. So follow these and enjoy it.

6 Essential Outdoor Kitchen Ideas With Wood Frame For Your Home Improvement

By / September 15, 2020 / Home Improvement Ideas, Receurse

An outdoor kitchen is a great place to have fun during the summer. It is a place where you can have amazing foods with your family and have a party in every meal. Even you can invite your neighbors as well as friends and relatives to the party to make it more enjoyable. You cannot do these things in your home outdoor kitchen ideas with wood frame for sure.

However, many people run out of Outdoor Kitchen Ideas. That is why I am going to tell you six essential Outdoor Kitchen Ideas with Wood Frame. Wood is inexpensive, easy to use, removable, and, most importantly, improves the aesthetic look of your home.

Outdoor Kitchen Ideas with Wood Frame

You may build an outdoor kitchen with other items such as concrete, steel, boards, and a mix of all these as well. But these are not as convenient as wood. You can customize wood as you want that is impossible with other materials.

That is why we will talk about the wooden frame for your good looking outdoor kitchen in your backyard. All you need to do is to read the article carefully until the end. Here are six outdoor kitchen ideas with a wood frame for your home improvement.

 

Build a wooden floor

The first step of the Outdoor Kitchen Ideas with Wood Frame to designing an outdoor kitchen is to build a wooden floor. Maybe you are thinking, why do you need a wooden deck where you can use the ground as a floor, right? Well, we are talking about a kitchen where you can cook, eat, have fun, and throw parties. So it has to be good looking and safe.

I am mentioning ‘safe’ here because, at night, different types of insects might come here due to light. You never want your children to expose to these insects for sure.

And when it comes to aesthetic look, a wooden floor will add an amazing look to your outdoor kitchen for sure. And at the same time, it will make your outdoor kitchen apart from your neighbor’s outdoor kitchen.

Making a wooden floor is not that tough. You can do it with ease. I know it will take extra time for you, but trust me, you will love it when it is done. You can add texture, color, or finish on the wooden floor to make it even more attractive.

 

Create a kitchen cabinet with a wooden frame

The main part of these outdoor kitchen design ideas is creating a kitchen cabinet with a wood frame. Since the kitchen cabinet is the main part of the kitchen, you need to put extra care while making it. Besides that, the kitchen cabinet will come to the touch of water, heat, moisture, and others. So you have to put extra care.

If you decide to use wood for the kitchen cabinet, then you should consider pressure-treated pine wood. The reason is simple. It holds up extreme heat that will be produced from your cooking or grilling, and at the same time, it will rot less than other wood.

But this wood itself might not be enough. You should use a cement backer board both inside and outside. It will protect the wood from extreme heat and water, as well. And one more thing here, always remember to be aware of fire safety. No matter you are using cement backer board or not.

Once you have done attaching the cement backer board, you can then add different types of decorative stone, stucco, concrete panels, and others. Remember? We are talking about the aesthetic look of your outdoor kitchen? So it has to be good looking.

You can make the frame whatever size you want and whatever design you want. It is all up to you. It is another outdoor Kitchen Ideas with Wood Frame.

 

Try shade

Shading is also important while it comes to outdoor kitchen ideas with wood frame. Of course, it is equally important for other materials as well. A shade will protect you from extra heat and also from dirt. Since it is your backward, there will be trees and tree leaves as well.

You can use curtains, draperies, and other shade treatments to cover the shade. But these will block the sunlight before it goes down. If you want a long-lasting approach that will provide you natural light for a little bit while then you can consider pergola overhead.

It will maintain some natural sunlight without compromising the shade for your kitchen. However, it is up to you what you want.

 

Keep a dining table in nature

As we told before, we are talking about outdoor kitchen ideas with wood frames for both cooking and dining. So there has to be a dining table. And since it is in the backyard garden, it will be in nature. Just imagine the scenario. You are having lunch or dinner or even breakfast with your family and friends in the garden, in a dining table.

And the good part is it is one of the outdoor kitchen ideas on a budget. You do not have to use a lot of money on it for sure. Even you can take your existing dining table from your dining room as well.

 

Decorate the kitchen with small herbs

When it comes to backyard kitchen ideas, there should be some small herbs. Why? Well, having some natural herbs will keep your kitchen fresh all the time, and at the same time, you can use some of them for cooking. Who does not want to have fresh foods, right?

And that you can add as one of your outdoor Kitchen Ideas with Wood Frame. Another benefit of having small herbs in the kitchen is that it will keep your kitchen even fresher. That means by this simple change, you can have a fresh food and fresh air. What else can you expect from this small change?

 

Add light for dinner

And the last step of your backyard kitchen ideas is considering the lighting in your outdoor kitchen design ideas. You should use light for two purposes. One is that lighting will help you see clearly at night. And the second one is that it will make a soft ambiance and mood for entertainment.

Don’t just rely on the natural light. You can use different types of lights of different colours. Or even you can use candle for candlelight dinner as well. It will surely add some value to your party.

 

Conclusion

These are six outdoor kitchen ideas with a wood frame that will help you build an amazing kitchen. It will add some value to your home and set you apart from your neighbors or others. Now it is time to arrange a party and invite your friends and relatives to let them know about your kitchen.

Making an outdoor kitchen might take your valuable time, but when you complete it, you will understand that it is worthy of your time. It will improve your bonding with your family, friends, kids, and relatives, or even neighbors. When are you going to make your one?

7 WAY TO UPDATE BATHROOM TILE WITHOUT REPLACING TILE ON A TIGHT BUDGET

By / September 15, 2020 / Home Improvement Ideas, Receurse

The bathroom is the place that every people want to make beautiful and stylish. Even it is more important to make it beautiful, fresh, and elegant than to make your home beautiful, smart, and fresh. If the bathroom is not good, your entire investment on your home improvement is not good, trust me. So Update bathroom tile without replacing.

That is why everyone tries to make his or her bathroom clean, fresh, and stylish. However, after a certain time, it requires updating to look new and fresh. But how can you update bathroom tile without replacing tile?

Well, in this article, we will talk about 7 ways to update your bathroom tiles without replacing the tiles. So here we go.

Update Bathroom Tile Without Replacing

Paint it

The first and easiest way to update your bathroom tile without removing it is coloring. It easy, and you change the entire design of your bathroom with this. However, it will not last as long as it would be if you replace the tile.

When painting, make sure you have chosen the right color that suits best your bathroom. In that case, you should consult a professional painter. He or she will tell you about the design.

Also, do not try to paint it yourself. Since you are painting over the tile, it is important you hire a professional and then let him finish the work.

One of the main reasons for this suggestion is that there is no ready mate paint in the market that you can directly put into your tile. So it will be a wise decision if you hire a professional.

 

Covering old bathroom tiles with wallpaper

Wallpaper is another good way to update bathroom tile without replacing tile. And it is the simplest way I guess. You do not have to be a paint master to add a wallpaper to your bathroom wall as well as the door. All you need to do is to choose some good, funny, and refreshing wallpaper and add it over the tile in the bathroom. You are done updating.

And since it is the cheapest, you do not have to spend a lot of money on updating. Even you can do it with a very little budget.

 

Decorative Decals

If you do not know how to update old bathroom tiles in a tight budget, then decorative decal is the best way for you. Decals are designed especially to work in tiles. In your bathroom tile, decals will last a long time, and you will have a good update.

The best part about decal is, you can get customized the artwork on it. If you want a beach or hill artwork, you can get it on the decal and set it to your bathroom. It will increase the beauty of your bathroom for sure.

Besides, you can change it as well after a certain time. Overall, it is a great way to update your bathroom tile without replacing it.

 

Add sticker

Many people often get confused between stickers and wallpaper. But these two are not the same. If you want to know how to cover bathroom tiles cheaply, then this item can be the one you are looking for. Stickers are beautiful, easy to use, and last long.

Another advantage is, you can change it whenever you want. Besides, there are thousands of options available. You can get different designs, different scenes, and different pictures as well.

And these are very affordable. You do not have to spend a lot of money on it. Some sticker companies offer free shipping and free installing as well. Even you can add it over the tiles if you want.

That means, overall, you are getting a good design at an affordable price with easy installation. So what else can you expect?

 

Install some shelves

If you do not want to put anything over your tile in the bathroom, you can change the design of your bathroom. It will make your bathroom updated, and at the same time, you do not have to put anything over the tile.

In that case, installing some different types of shelves can change the entire outlook of your bathroom. In addition, you can put some amazing showcase on those shelves along with soap cases and shampoo bars. It might be a small change, but it will update the bathroom tile without replacing tile.

 

Market makeover

It is one of the best ways to update your tile. It will make your tile looks new. And it will entirely change the look of your bathroom, and you will feel like you are in a new bathroom.

To do that, you can either hire a professional or do it yourself. But you have to be a good artist in order to create a design on the tile.

At first, clean your bathroom tile with water, vinegar, soapy water, or any other things and then let it dry. After drying, use a permanent marker and create your design.

You can design as you want. Also, you can write quotes with design, as well. If it is a child bathroom, you can design with a funny cartoon.

 

Add accent tile

And lastly, you can add accent tile over the tile. This is an easy and nice way to update bathroom tile without replacing tile. The best part about the accent tile is that you will find different colorful accent tile. These are small and look good.

So if you add it over your old, faded tiles, you can easily change the look of your bathroom.

 

Final thoughts

These are the 7 ways to update bathroom tile without replacing tile in a tight budget. These are simple, and you do not have to put a lot of effort to complete it.

We all want a fresh, new-looking, and beautiful bathroom for us. So whenever your tile gets older, it is your duty to update it. And these are the best ways to update it without removing the tile. So follow these and enjoy it. 

13 Best Home Improvements To Increase Value Of Your Home

By / April 24, 2021 / Home Improvement Ideas, Receurse

Do you want to get the Home Improvements of your living experience? Well, you can easily do that by having some home improvements. Besides, the value of your home relies on how you take care of it. No matter if your home is larger or smaller, you can add values there with some remodeling techniques. If you want to sell the house, you need a better price. Besides, if you’re going to have a comfy life, you need those improvements too. The 13 Best Home Improvements here will help to increase value of your home. And they will provide a more relaxed continuous feel too.

Anyway, amid hundreds of the ways, the 13 Best Home Improvements to increase the value of your home are briefly explained here. They will dig into deeper and provide you some additional ideas to remodel your home.

Here are the 13 Best Home Improvements for you

New flooring

Have you ever looked at the floor with care? If not, please do it today. You know what- the floors are the most used portions of a home. Can you do anything without stepping on the floor? If yes, you are superhuman and share your facts on the comment section below. Please remember, new flooring will increase the value of your home, bring a stunning look, and sense of comfort. Usually, the average cost of new flooring is around USD 6 – USD 10 per square foot.

READ MORE>>

Replace the roof

Roofs always protect people from sun, heat, and other external issues. The Best Home Improvements to Increase Value can play a significant role here. Do you know how roofs play roles to save us? You can make some comments below about it. With time, roofs need changes. So, you can plan for a roof replacement too. The new roof will bring a grandeur look. But remember to replace the roof with proper elements. Pricing is the other issue to focus. Usually, roof replacement cost is over USD 10,000 in average. View Details>>

Update the color palette

This is a bit complex issue to ponder on. Many of the homeowners do not focus it considering the troubles associated. But if you genuinely want to increase the sale value, update the color palette. The color combination that was the best 20 years ago will have less or no appeal. Regarding the price, you need to consult with experts. The price fluctuates in international market. More Information>>

Paint your front door

The entrance plays a pivotal role to create a positive and first impression. So, you also should plan to paint your front door. Most of the cases, the front door is not cared at all. People ignore the front part, and it looks unpleasant. But the scenario might change to the opposite. However, the cost for painting varies but might not cross USD 300.  Get More Info>>

Additional bathroom

Can you wait for long to attend your natural call? The situation is complex and needs an immediate attention. So, when the house is filled with guest, you need an additional bathroom. Don’t worry about the cost; it won’t cross over 3000 dollars. But you will get an added value for the extra bathroom. So, when you plan to increase the value of your property, add an extra bathroom at your home.  Learn More>>

Update bathroom tile

Like the home floors, the bathroom tiles also bear some unwanted marks. Often the marks turn permanent. And this is not possible to clean them regularly. Of course, you must keep the bathroom clean, but if there are stains or permanent marks, update the tiles. For a small to medium bathroom, it will cost around 7000 dollars. And the cost might increase more for larger bathrooms. For More Detail>>

Remodeling the Kitchen

Bored of the old kitchen? You need remodeling. Replace the burner. Shift the refrigerator to another corner of the kitchen. Besides, you can also replace the kitchen cabinets. In that case, it is wise to select the ones with durability. Kitchen remodeling is a costly issue. You can complete it within 4000 dollars. Or if you want something lavish, the cost might be over 50,000 dollars as well. Remember a reshaped kitchen helps to increase the value of your home.   Know More>>

Outdoor kitchen

Having an outdoor kitchen has several benefits. If you love to spend time with friends and family, a backyard kitchen is a blessing. This is tough to carry the cooking materials in the backside of the home. But a built-in kitchen will reduce the stress. You can prepare your favorite dishes and enjoy them on the spot. The kitchen is not that much costly. You can cover all the costs within 5000 dollars.  For Further Details>>

Entertainment room or Drawing room interior

A specific entertainment room is an effective way to increase the value of your home. Many of the people lack the idea of separate entertainment space. They consider the living room is the perfect place for entertainment. But beyond the living room, there might be some other spaces too. However, remember this is a costly issue as the prices of entertainment materials are always higher. In the end, they will make an impressive room.   In Further>>

Covered terrace

At times, we need to meet and greet our guests at the terrace. What is the sun is too angry or the weather is crying? A covered terrace will solve the issues. If you can have a covered terrace, it will help to protect you in seasons. Besides, the cover will add some additional beauties there too. But the only thing to ponder is the price. Sets are available to cover the terrace with different price range. Know More>>

HVAC upgrade

The heating ventilation and air conditioning, aka HVAC, is an important aspect to focus. Sometimes, the HVAC system can malfunction. There are several reasons, and not most of them are repairable. So, you can upgrade your existing HVAC facility. But remember to check the installation system. An average cost of HVAC upgrade is around 12,000 dollars. But if you have a larger home, the cost may increase a bit.  Find Out More>>

Adding Energy-Efficient Windows

Want to cut your power bill for the upcoming months? Well, the solution is simple. You can add some energy-efficient windows at your home. They will allow entering lots of natural lights and air. As a direct consequence, the necessity of heating or cooling the house will get a reduction. The cost of installation is between 500- 800 dollars. You can increase the budget in case of some fancy products windows too. Read More>>

Energy-Efficient Insulation

This is the other way that increases the value of your home. If you have energy-efficient insulation on your roof, you will get more light. The heating system will also get a natural improvement. They will have less application if the insulation is energy-efficient. The cost of per square feet insulation is around 2.00 dollars. More Information>>

Final thoughts

The ideas above can play some significant roles to have the Best Home Improvements. Simultaneously, they will add value to your home or property. But while applying the improvement, you must consult experts. It is imperative not to waste your hard-earned dollars by hiring some unskilled hands. They may not install or remove elements. So, get some professional help. And make a detailed plan too. Follow the plan, and the improvement will be perfect and straightforward.    

How We Improved Our EASY CHEAP FLOORING in One Week

By / September 15, 2020 / Receurse

When setting up a new floor in our home, the first thing we look at is the quality and look. But at the same time, we consider the cost as well. If we have a large budget, we can easily find the best quality and best look for our home floor. But when it comes to easy cheap flooring, it isn’t very easy for sure.

Obviously, the new flooring cost is higher. But if you have good ideas, then you can easily reduce the cost yet get the best result. But how can you do that?

Well, I have done all the hard work for you. In this article, I am going to tell you how you can do easy cheap flooring. All you have to do is to follow the process I am going to tell you.

Easiest cheap flooring for your new home

When it comes to easy cheap flooring, vinyl flooring is surely the best. It is good looking, easy to install, and most importantly, inexpensive. That is why it can be a good option for you, and that is the reason I am going to tell you how you can install vinyl flooring in your home. So, without any further due, let’s get started. Here we go.

EASY CHEAP FLOORING in One Week

How to install vinyl flooring

Installing vinyl flooring is easy, for sure. But it is not that easy you are thinking at all. But the thing is that the effort you are going to put into installing it is worthy of it. When you are done installing the vinyl flooring, you will feel the vibe of the flooring.

Preparation

Every flooring requires preparation. But when it comes to vinyl flooring, it needs more preparation than others. But don’t worry, taking preparation for vinyl flooring is no hassle at all. You can do it easily. But you have to do it carefully.

The reason is that if you keep a protruding nail on the floor before installing the vinyl flooring, it will form bump overtime on your floor. And you have to tolerate this uneven surface all the time. So, make sure you have prepared the floor for installing.

Step 1: Remove the existing floor: Some of the vinyl products allow you to install it on the existing floor. But most of the products need to be installed directly on the floor. That is why it is important to remove your existing floor. Because if you do not remove your existing floor, it might remain uneven, and that will not be an ideal option for you. So, your first task will be removing the existing floor with tools.

Step 2: Level the subfloor: Now, check the subfloor after removing the existing floor. You know, after removing the existing floor, it will be uneven. And as you learn, the vinyl floor is not good on the uneven subfloor, right? So now it is time to level the subfloor.

However, if you find out that the subfloor is even, then you are ready to go. You do not need to do anything at all. Moreover, if you install plywood underlayment on the floor, make sure it is even as well. Use caulk to fill all the holes caused by screws while installing plywood underlayment.

Step 3: Clean the floor: And lastly, clean the floor. As you know, having any particle on the floor may cause a bump in the vinyl flooring. So, make sure you have cleaned the floor thoroughly. At first, use your broom to clean all the dust and debris on the floor. And then you should use a vacuum cleaner along with a hose so that no particles remain on the floor.

Step 4: Measure: While measuring the floor, you need to design how you can layout your tiles. When planning for layout, you should measure perfectly. I hope you have done measuring while ordering the vinyl flooring. Measuring is the most important thing to prepare yourself for flooring.

Install

After completing all the preparation, it is time to go for the most important and skillful task, installing the floor. It would be best if you were more careful while installing the vinyl floor. One-inch mistakes can destroy the beauty of the floor, and that can destroy out easy cheap flooring idea.

Step 1: Start Installing from the First Row:

The first step of installing this easy cheap flooring is to choose a corner you find convenient and start working. With the under edge of the vinyl, lie the first plank down facing to the wall. One thing you have to make sure here is a quarter inch gap between the plank and the wall.

This small gap will provide you with the support for the subfloor expansion as well as contraction. Once you are done with this part, you need to place the second plank                successively.

In this stage, you need to start working at any corner of the room and with the under edge, lie down the first plank facing the wall. When you get ready to install, make sure that there is quarter-inch difference between the wall and the planks. When you do this, it will give you support for subfloor contraction and expansion.

Boards should run along the longest wall

Also, you need to lay all the vinyl boards parallel to the longest run of your floor. For example, if your floor is 12 feet long and 10 feet wide, your boards should run along that 12 feet wall. It looks best.

Make sure that you keep a 45 degrees angle

When this is done, you will need to place the 2nd plank. Make sure that you keep a 45 degrees angle with the overedge on that undersize. During the task, always keep the board as tightly as possible and then press the seam. Now it is time to reinforce the grip strips bond. To do that, use your hand roller. You can do it easily.

It seems confusing and hassle, but trust me, it is not. And this little hassle can give you the best result you are looking for. If you find out that the seams are not tight enough, separate all the planks and start from the beginning. But be cautious here about damaging the grip-strip.

Carefully, pull the top panel from the bottom of the vinyl board and then adjust the board and again roll the seam. Continue the process of placing the board and rotate the seam until the rows are finished.

Step 2: Install the Planks Carefully:

When placing the second plank row, snap the first plank to make the seam stick minimum six inch from the first row. At the same time, keep in mind that you need to keep continuous gap in the wall at the end of each row. Spacers can help you get this job done.

When it comes to installing the plank in any opening area, the best thing you can do is to cut the door casing. Why? Because it will enable the blade to slide it down. Simply keep the casing intact by placing the plank next to the casing and then, with the help of jam cutter or a saw cut the doorcase.

You are done.

Congratulation.

Installing these new flooring ideas is simple. And the best part is that this new flooring cost very less. Also, it needs less maintenance, it is durable, and it adds some value to your home.

Costing

As we said, it is one of the best new flooring ideas that can reduce the new flooring cost. But what is the cost of the flooring actually?

Well, it depends. It depends on the quality of the materials you are going to use and also, it depends on the size of your floor. So, in general, the vinyl costs $2-$8 per square foot. That means in order to complete your 220 square foot vinyl floor without any stair, it will cost around $800-$1600. But it is worthy of it for sure.

Warning

When using vinyl flooring on your bathroom or kitchen, you should be cautious. Why? Well, vinyl flooring is cost effective and long lasting for sure. But the problem is that the seams of the flooring create opportunity for water to seep between your tiles. And that can result rot to your subfloor. As a result, in the future, you might need to spend a lot of money repairing it. So, it is better not use vinyl flooring in the kitchen or bathroom.

In addition to that, vinyl flooring is good for the place where you can control the temperature. Excessive heat or cold can damage the floor and you know; it will cost a lot to repair. That is another reason not to use it in the kitchen. Similarly, if you are thinking of using it on the veranda, make sure the temperature is under control. Otherwise, you will regret.

Conclusion

You know, good flooring can change the look of your home. You will feel lively if you have good flooring. But if having that expensive floor is not an option for you, you can try vinyl flooring. It is one of the best new flooring ideas for you. I hope this easy cheap flooring will save your new flooring cost.

It will make your home look classy, make you feel comfortable even though it is inexpensive because of its look, and most importantly, it will save you a lot of money. So, without any further tension, design your home with easy cheap flooring-vinyl flooring.