Resource

How to make cabinet door

How to make cabinet door

Are you trying to build your own new cabinet door? Or, are you thinking for a Replacement kitchen cabinet doors of your current one by your own hands? But don’t know how to make cabinet door! If that’s the case, please continue reading this article. This will give you step by step easy cabinet doors guide to build your own cabinet door in quick time.

Dimension of the Door

Cabinets are one of the essential elements for any house. Whether it’s a bathroom or kitchen, you always need a cabinet for sure. These cabinets come from different size and shape according to people’s need. So, the door size and design also vary from person to person.

So, when you will start making raised cabinet doors the dimensions are important. You have to plan accordingly as well. This will be also a cheap cabinet door. After making the cabinet doors, you have to make sure that it is perfectly fitted. Otherwise, all the hard work will go in vain. So, without further due, let’s begin our process of making cabinet doors.

Necessary Tools:

  1. Walnut Wood.
  2. Sander.
  3. Round Rail and Stile Router Bit Set.
  4. Quadra-Cut Raised Panel Router Bit with Backcutters.
  5. Woodpeckers Coping Sled.
  6. Router tables.
  7. Router Bit Set-Up Jigs.

Lets Learn How to Make Cabinet Door

Step By Step Guide:

  1. You might have understood now that I’ll be making the door from walnut wood. So, at first cut some walnut boards for the raised center panel portion by 1 inch longer than it needs.
Center pannle boardCenter pannle board
  1. Then rip the board into smaller pieces to make sure its functionality as a raised panel. Once you have ripped, it’s off to the jointer to get one side flat.
Rip the boardGet one side flat
  1. Move your wood through the jointer to get the board perfectly thin shaped. This is not something that you will get by using a planer. Because planer will force the board to be flat with uniform shape.

Jointer Machaing

  1. Next, make your board parallel from the top by using a planer. You can use pencil mark to get the trace of the top side.
  1. After that, it’s time to use the jointer to make the board square and flatten on one edge. Make sure this part is done very carefully. Otherwise, the shape can be mismatched.

Flatten on one edge

  1. Then use the table saw and put the jointed edge against the fence. Take a tiny bit off of the other side with the blade in order to make the board perfectly flat, square and parallel.

Against the fence

  1. Now it’s time to put the panels together. Use more than enough glue to thoroughly cover the entire surface. After putting the glue, join the parts carefully and dry for an hour before proceeding next step.
Panels togetherPutting the glueJoin the parts carefully
  1. After unclamp, scrape off the large chunks of glue that were left behind by using a wet rag. Then it’s time for a quick sanding to perfect it looks. Use a sander with 150 grift paper.

Quick sanding

  1. Now, use the router table to make router panel joints- rails, stiles and of course the raised panels. The rails are the horizontal piece that goes across the top and stiles are the vertical piece. You can use template guide if you are doing it for the first time. It will be a great help, trust me!
Template guideTemplate guideTemplate guide
  1. Use the coping sled and slide up the rail pieces into it to do the coping cuts. Then unclamp the coping sled, flip the board and continue same procedure for another side. The bottom rails are always 1-1.5 inches in width and the tops are normally 3 inches in width. The center rails naturally have 2 inches in width. But you can always use your own measurements if you want.
Coping sledCoping sled
  1. Then it’s time to cut stiles. It’s better to keep the good side down. But it doesn’t matter which side you put against the fence as both sides are same. But don’t forget to cut both sides. The size of stiles normally remains the same. The natural width of stiles remains from the 2-2.5 inch. This size can vary from design to design and on individuals taste also.

Cut stiles

  1. Now, time to route the raised panel. Be sure about height and width before doing this. Set your router to the slowest possible speed. You can repeat this step for the smoothest possible result.

Route the raised panel

  1. So, all the rails, stiles and raised panels are ready. Now, you need to sand the burn marks off of the raised panel. Use the soft sanders with sandpaper to do this for a better result. This kit comes with six different blocks which are why they can sand any sheet.

Use the soft sanders

  1. Finally, time to assemble raised panel Use the glue on both sides of rails, stiles, and panels to make sure there is no shortage of glue. Make sure you put the glue on every joint and dry them for over night at least.
Assemble raised panelAssemble raised panelJoint and dry them
  1. After joining all the parts, you can use the sander with 320 grame paper for the last time to guarantee perfect sanding. That’s it. Your door has been made.

Door has been made

I hope you got your answer of “how to make cabinet door” after reading this step by step guide. In this way you can also make Kitchen cabinet doors. It is my pleasure to be a helping hand for the people. Thank you.

How to Make a Couch from Pallets for Your Patio | Modern Outdoor Sofa

Just imagine that you are enjoying a summer evening with your family. And you are sitting on modern outdoor sofa or a couch at the patio.  Isn’t a great time? So everybody should have a couch on their lounge. Let’s learn how to make a outdoor sofa from pallets.

It will be a cheap and time saver work. This homemade outdoor furniture gives you comfort and become artistic to have a modern  sofa just at the porch or next to the door. Now a day it is easy to make outdoor furniture made from pallets.

How to Make a Modern Outdoor Sofa

To do so, we need 9 pieces of 2×4 @72″, 13 pieces of 2×4 @ 25.5″, 2 pieces of 2×4 @ 28.5″ boards. Apart from these, we need wood glue, sandpaper, some relevant tools like saw, measuring tape, square, drill with driver and mini pocket hole jig.

how to make a couch

First of all cut the boards perfectly with the help of a saw.

how to make a couch

To do it, place 72″ two boards keeping 25.5″ distance from each other and put five more 25.5″ boards inside the two long boards 16″ apart. It will look like a ladder.

modern outdoor sofa

Attach these five boards with the long two, by 2.5″ self-taping exterior decking screws using the drill bits.

modern outdoor sofa

Now it is time to frame the arms. Attach the 28.5″ armrest to the 25.5″ two legs. Use 2.5″ exterior decking screws. Then add a support of 25.5″ board at middle or 14″ up from the bottom of the legs horizontally.

outdoor furniture made from pallets

To complete the arms, include another piece of board underneath. We’ll utilize this board to tie into the seat frame. In this way will make another arm frame, using the same screws. Thus make two arms for the both sides of the sofa. After this step we are in the middle of our learning, that how to make a couch from pallets for your patio.

outdoor furniture made from pallets

After that attach the seat floor to the vertical supports of the two arms using the same 2.5″ exterior decking screws. We can take the help of a clamp.

outdoor bench plans

Now add six 72″ boards as seat slats screwing down to the seat floor by 2.5″ exterior screws.

outdoor bench plans

At last we need to attach the back of the modern outdoor sofa. Take only the rest one 72″ board and place it horizontally at the top of the arms. Only this time with the help of a mini pocket hole jig use 2.5″ pocket hole screws to attach the back. We have completed our learning, that how to make a couch from pallets.

outdoor bench plans

Last word

Now our cherished homemade outdoor furniture is ready to use. Buy appropriate cushions of your own. Hope you understand how to make a couch from pallets for your patio. Next time we will learn more outdoor furniture made from pallets.

Type of Wood Routers and Router Accessories

Type of wood routers

“Different types of best wood routers are available and different manufacturers produce the routers for different wood works.” Source: http://myhandtools.com/

Type of wood routers

Carpentry has reached into the form of an art and the each of the routers has different use but all of them are necessary for carpentry. Among the routers, the most notable routers are as followed –

Plunge Routers  

Plunge routers are handy in use and allow you having depth cut by keeping the router on but the plunge mechanism increase the weight of the router.

Fixed Base Routers

Light in weight and a compact size and the depth cut is pre-set before you switch on the router.

CNC Routers

Computer numerical control (CNC) routers are used for making objects using woods and works based on Cartesian system. The designs are made using computer and the cuts are done with the router.

Combo Routers

Such wood routers come with both the fixed base and plunge base routers and helpful to save your bucks. There are one motor but with several bases to get you done all types of wood routing jobs.

Variable speed Routers

The routers are able to control speed at different levels particularly during the depth cut, making design etc.

Laminate Trimmer

A small scale router that is made to perform the small scale jobs. Mostly it lacks the energy to complete any large wood working jobs.

Wood routers accessories

There are different wood router accessory is also found in the market for your wood routing jobs. The most notable craftsman router accessories are:

Router bits – Usually the router bits are the cutting tools in a router. They help creating cylindrical holes in cutting.

Sometimes the router bits are provided with the best wood router and in some cases, you are to get them from the device selling stores.

Fences – it is a kind of protecting material for the routers. The fence is also used to assist the router bit. When the bit creates holes in the wood, the bit is moved against the router to make the holes perfectly. Sometimes the fences are given with the router kit and at times you have to get them externally.

Clamps – are the device that helps binding different element together and for router, but clamps are used in wood working routers for different purposes like it mostly binds the motor with the base and in some cases, it keeps the other tools together.

Clamp is also used to lock down the joints of a router and different other use. They are easy to lock and unlock and could be done in a few seconds.

Speed controls – it is the way to control the motor speed of the router. Wood workings require different speeds to run the motor and it varies for the wood surfaces. When the woods are soft, you need to use the lower speed as if you increase the router motor speed that may damage the wood.

Again, if the wood is hard enough to penetrate, you have to increase the speed for a smooth execution. Speed control feature of the best wood router helps to decide the required speed of the router according to your application.

Jigs – it is the tool that helps to control the location of the router. When you are routing on a piece of wood, the jigs help to guide the router on the desired way and also holds it on its position. The jigs are most of the time associated with the router kit.

Switches – Switches are one of the key elements of the routers. They are a must to on or off the tools. Almost all the routers come with switches and those are mostly used in the starting of the devices.

Besides, there are also different other switches in the router for controlling the router motor RPM. The switches are primarily attached with the routers and if those get damaged, you have to replace them.

Router table – the router table is used to contain or set the router on a table for steady works and helps to speed up the routing process. The tables are the most essential elements for getting different shapes in wood works.

The router tables are made of different design and type based on the necessity and types of the routers.

Router accessories templates – The template is the premolded design or guide which helps to make designs on wood by the router. Template direct bushings transform you switch into an example adherent.
Template directing proves to be useful for a wide range of uses, for example, lettering, decorates, and molding indistinguishable furniture parts.

Not only that some brand company are making router accessories whom are the popular for their wood router also. Router accessories Bosch one of them. They are producing good quality of router and accessories as well.

Wood Router Buying Guide for New The Beginner Woodworker

Wood Router Buying Guide

There are some tools that make the life of people working in an industry easier while there are others which completely revolutionize an industry. Wood Router is a tool that has revolutionized the way carpentry was practiced. Here is a Wood router buying guide on this innovative equipment.

Before the innovative wood routers came to market every carpenter used to have a large collection of wooden planes which were used to carve and cut designs on wood.

These planes were bulky and occupied a good amount of space in the workshop. Wood Routers replaced these bulky planes with a lightweight, handheld machine capable of carving thousands of designs using a wide array of bits. There are wide arrays of wood routers available in the market. Considering the number of router options in the market, choosing the best wood router is not an easy task.

In order to help the buyers understand how to buy a best wood router, here is our step by step buying guide to select the most suitable router for their needs.

Wood Router Buying Guide

Things to Consider

Things-to-ConsiderHere is a list of all the essential features and a study of their impact on the router usage. Buyers can test the router they have selected against the parameters given in this router buying guide.

The guide ensures that they know how to buy a wood router that suits them the best.

Power Requirements

Power-RequirementsPower of a router determines its usage, amount of work it can perform and longevity. A powerful router can cut through hard varieties of wood with great ease while a small router does the task in a greater amount of time and more effort.

A small router is beneficial for users who cut through softer variants of wood or need to perform minor cutting tasks on hard variants of wood. On the other hand, for heavy cutting on hard wood, a large router is better suited variant.

Operational Modes

Operational-ModesSome of the best wood router to buy offer both fixed base operations and plunge base operations. According to the most experienced professionals having one type of base limits the number of operations that can be performed by the router. To fully exploit the capabilities of a router it is recommended to buy a router with both fixed and plunge bases.

Compatible Bits

Compatible-BitsThere are a wide array of Bit shanks available for the routers. Shanks are available from 1/8 inches onwards. There are some of the best wood router to buy that support multiple bit shank sizes using adapters. One must choose a router that supports a wide array of shanks as it increases the number of designs that can be carved using the router.

Warranty

WarrantyWarranty ensures longevity and complete peace of mind. It is a factor that does not effects the performance of the machine, but plays a vital role in decision making process. A longer warranty ensures that you don’t have to worry about the router for years. There are some best wood router to buy which offer warranties up to five years.

Ergonomics

ErgonomicsThe machine should fit inside the palms or the handles should fit in perfectly while giving a clear view at the cutting bit. Ergonomics are the factors associated with ease of use.

One should always try to hold the machine in their hand before buying. It gives a sense of compatibility with your body. If you have a large palm, a very thin machine will not suit you while a person with a very small hand will appreciate a compact machine.

It is one of the most significant feature that most professionals emphasized while we researched for this Wood router buying guide.

Soft Start

Soft start ensures that you give a precise cut every single time you use the machine. Soft start features starts the cutting process at a very slow rate giving the user a little time to adjust the tip of the bit with perfection. Some of the best wood router to buy offer a very slow start for high precision.

Multi-Speed Operations

Multi-Speed-OperationsDifferent varieties of wood and different type of applications need different cutting speeds for perfect cuts. While some operations need a fast moving bit others need a slow moving bit for a perfect cut. In such cases, a router with multiple speed adjustment options comes in very handy as it performs a wide array of tasks with perfection.

It is recommended that one should never buy a single speed router if they plan to do creative and artistic operations using the router. A single speed router kills the creative capabilities as there is a need to go slow in most of the creative operations that a single speed router does not supports.

Router Body

Routers come in all kinds of body types from ABS plastic material to high strength aluminum body. For longevity and durability a user must consider a metal bodied router. A metal bodied router gives freedom to the user.

Who Needs A Wood Router?

Why-Do-You-NeedWood router is needed by carpenters and wood working professionals like interior decorators who need to carve and cut different shapes and designs on wood. Apart from these professionals, it is a must have tool for DIY enthusiasts who love to create their own masterpieces.

When creating this Wood router buying guide we came to know that there are professionals like interior decorators who need this equipment more than carpenters. So, we felt it necessary to educate them on how to buy a wood router that suits them the best.

Why Do You Need A Wood Router?

A wood router is an equipment that not only enables the carpenters, craftsmen and artisans to create their masterpieces but it enables them to do it wherever they like. Routers are small compact and there are light handheld versions that can be taken anywhere.

These lightweight equipment can be taken with to the client location and create designs they desire with perfection and great ease. A wood router can perform three types of cutting tasks.

  • Straight Cutting
  • Rabbet Cutting
  • Spiral-Up Cutting

So, if you have any of the above three cutting needs, a wood router is a must have professional equipment for you. This Wood router buying guide will help you in the decision making process.

Conclusion

Wood Routers have proven their Mattel over time, they have replaced a huge set of wood cutting tools and have increased the production capacity of carpenters and professionals. Routers give a very fine and precise cut using a wide array of router bits. A router is not only a wood cutting machine, it is also an artistic machine that enables the users to give multiple shapes and designs.

One can carve their imagination on wood using a router. So, in order to make the optimum use of the router one must consider all the above mentioned features before making a buying decision. This Wood router buying guide covers every significant aspect which should be considered before buying a Wood Router. It is a complete guide on how to buy a wood router.